Friday, 15 February 2013


                               INTERVIEW QUESTIONS FOR ELECTRICAL ENGINEERS PART-2


Q.1- What is meant by cold loop test in instrument


Q.2- What will be the effect of in HT XLPE 220 KV cable when one side of the Armour/cable ends are not      grounded. Will there is difference between 3-phase voltages? like: if A. Both End of Cable grounded Phase      Voltages:- V1=219 KV, v2=220 Kv, v3=220 KV. B. One End is grounded other is not: than Impact on Phase      Voltages:- V1= KV, v2= Kv, v3= KV. Remain same or unchanged??

Q.3- what will happen if any motor runs long time with star connection in400vA.C. system

Q.4- How Many safety of Air circuit breaker

Q.5- In Star type and Delta type Motors, If one phase will miss/Break then which phase winding will burn and      why?

Q.6- What is isolators and bus bars?give answer in details

Q.7- what is necessity of using isolation transformer?

Q.8- what is slip?

Q.9- WHAT IS SUBSTATION & ACCORDING TO VOLTAGE HT,EHT SUBSTATION EXPLAIN IT

Q.10-Why we use mostly circular coil in transformer? not square or rectangular type of coil.

Q.11-Why we use circular(Stepped) cross section in transformer core?

Q.12-132/66kv sub-station procation ?

Q.13-why is neccessary Tap changing of power transformer with in a certain time

Q.14-why capacitor do not switch ON the DG power? (I had checked, capacitor ON in DG power that time current rating was reduced.)

Q.15-what is the responsibility of C license holder in industry?

No comments:

Post a Comment